YASH CONCRETE CO. — ENGINEERED FOR CONSTRUCTION
CONSTRUCTION
MACHINES &
EQUIPMENT
Heavy-duty mixers, pumps, compactors and precast systems built for reliable output on concrete jobsites across India. Every machine is precision-engineered, field-tested and supported end to end.
Quality Assurance
Engineered for Precision & Durability
Every Yash Concrete Co. machine is built, tested and certified against international standards — so it performs reliably through years of heavy jobsite duty.
ISO 9001:2015
Certified quality management across design, fabrication and assembly.
CE Conformity
Meets European safety, health and environmental protection requirements.
Heavy Duty Rated
Structural frames stress-tested to sustained continuous industrial load cycles.
IS Compliant
Fabricated to Indian Standards for concrete equipment construction.
Documentation & test certificates available on request — Request Compliance Pack
Machine Catalogue
Browse by Application Category
Six engineered families covering the full concrete workflow — from batching and mixing through pumping, compaction, reinforcement and finishing. Select a category to view specifications, capacity ratings and site-ready configurations.
Not sure which configuration fits your project? Our engineering team can spec capacities, power requirements and accessories against your drawings and schedule.
Precision Catalogue Control
Advanced Technical Filter Bar
Narrow the full machine range by category, power source, output capacity and job-site application. Every control is engineered for exact specification matching — so the catalogue grid below returns only the units that fit your project requirements.
Active: Mixers & Batching Diesel-Hydraulic Road & Bridge Add Filter
Showing 18 of 64 machines
Catalogue grid loads below with matching spec sheets
Precision Catalogue Control
Advanced Technical Filter Bar
Narrow the full machine range by category, power source, output capacity and job-site application. Every control is engineered for exact specification matching — so the catalogue grid below returns only the units that fit your project requirements.
Full Range Inventory
Complete Machine Catalogue Grid
Every unit in the Yash Concrete Co. fleet, catalogued with its core duty cycle, drive type and rated output. Hover any card to reveal its technical specification strip — built for site engineers who compare numbers, not brochures.
Side-by-Side Spec Analysis
Model Comparison Tool
Compare up to three machines from the Yash Concrete Co. fleet on a single sheet. Select units below to reveal rated capacity, motor power, operating weight and footprint — the exact figures site engineers use to spec a pour.
| Specification | Machine A | Machine B | Machine C |
|---|---|---|---|
| Model Name | Concrete Mixer — 10/7 CFT | Hydraulic Boom Pump — HBP-38M | Add a machine to compare |
| Rated Capacity | 10 / 7 CFT per batch | 38 m boom reach | — |
| Motor Power | 7.5 kW electric drive | 110 kW diesel-hydraulic | — |
| Operating Weight | 1,850 kg | 28,500 kg | — |
| Dimensions (L×W×H) | 2,100 × 1,400 × 1,600 mm | 10,200 × 2,500 × 3,300 mm | — |
| Indicative Price | Rs. 3,85,000 | On Request | — |
| Full Datasheet | Full Datasheet | Add Machine |
All specifications are rated outputs measured under standard site conditions. For custom configurations, transport logistics or bulk-fleet pricing, contact the Yash Concrete Co. engineering desk directly.
How It Works
Procurement Process: From Inquiry to Site
A disciplined three-stage route from first specification call to a fully commissioned machine on your pour. Every Yash Concrete Co. order moves through the same engineering-led checkpoints so lead times stay predictable and nothing reaches site half-verified.
Step 01
Select & Configure
Share your pour volume, site access and power supply. Our engineers match the right mixer, pump or batching unit and confirm the exact configuration — drum capacity, boom reach, motor rating — before anything is quoted.
Response within 24 hours
Step 02
Quote & Approval
You receive a line-item quotation covering machine cost, freight and commissioning, with warranty terms stated plainly. Approve digitally or on paper — no hidden charges and no revisions after sign-off.
Transparent, itemised pricing
Step 03
Delivery & Commissioning
We dispatch to your site, install the unit, run load trials and hand over operator training. Commissioning is signed off only once the machine performs to its rated specification.
On-site setup & handover
Every stage is handled in-house — no third-party handoffs.
Speak to YASH directly at +919728245555 or write to [email protected].
Engineering Excellence
Key Features Built for the Pour
Every Yash Concrete Co. machine is engineered around one principle — relentless uptime on site. Below, a cross-section of our core hydraulic assembly with the structural decisions that keep it running under load.
Fig. 01 — Hydraulic Drive Assembly
Pump Housing
A. Pressure Valve
Rated to 180 bar
Mixer Drum Core
B. Steel Frame Chassis
S355 structural grade
Motor Unit
C. Access Panel
Tool-free service door
Max Output
45 m³/hr
Cycle Time
38 sec
Service Interval
500 hrs
Heavy-Duty Steel Frame
Built from S355 structural steel with reinforced weld joints at every stress node. The chassis absorbs vibration and torsional load during continuous pour cycles, extending frame life well beyond industry-standard duty ratings.
Energy-Efficient Motors
IE4-rated electric motors paired with variable-frequency drives cut power draw by up to 30% compared to legacy fixed-speed units. Consistent torque delivery means fewer stalled batches and lower operating cost per cubic metre poured.
Easy Maintenance Access
Every wear component sits behind a tool-free hinged panel reachable without lifting equipment. Grease points, filter housings, and drive belts are colour-coded and labelled so a single technician completes routine service in under 45 minutes.
Precision Mix Control
Programmable logic controllers manage water-to-cement ratio, aggregate feed rate, and mixing duration to within ±1% tolerance. Batch records export automatically for QA documentation on every project.
12+
Years R&D
ISO 9001
Certified
3-Year
Structural Warranty
24/7
Parts Dispatch
Where They Work
Applications Across Industries
From the first foundation trench to a forty-storey skyline, Yash Concrete Co. machines are specified for the exact demands of each build. Explore four sectors and match the right equipment to your next pour.
Contractor Feedback
Trusted on Site, Day After Day
Concrete work does not wait for anyone. The contractors below run Yash Concrete Co. machines across real pours — and they keep coming back for the reliability and after-sales support that keeps their crews moving.
Every review verified from an active Yash Concrete Co. client account
Custom Quote Desk
Ready to Upgrade
Your Fleet?
Contact our engineers for tailored solutions. Tell us your project scope and we’ll spec the right machines, configuration and delivery window — with a written quote you can act on.
From single mixers to full batching plants, every Yash Concrete Co. unit is built for continuous site duty. Our team responds within one working day with pricing, lead time and freight options.
Get Started
Or speak to an engineer
Engineered for Construction
Precision-built concrete machinery — mixers, pumps, batching plants and material handling systems engineered for continuous site duty across India.
Product Categories
© 2025 Yash Concrete Co. All rights reserved.
