Ramp Tiles
Heavy Duty Ramp Tile
Heavy Duty Ramp Tile
Recommended Structure for Heavy Vehicle Ramp Base Layer
- RCC concrete base minimum:
- M25 grade concrete
- Thickness: 100–150 mm
- Steel reinforcement:
- 8 mm or 10 mm TMT mesh
The tile is innocent. Gravity is not.
Heavy Duty Ramp Tile Specifications
Because apparently vehicles looked at normal tiles and said, “Cute. I will now crack you like a biscuit.” So here’s the proper industrial-grade stuff.
Product Type
Heavy Duty Ramp Tile
Used for:
Parking ramps
Basement entry slopes
Loading bays
Warehouse ramps
Car showroom entries
Industrial movement areas
EV charging parking ramps
Used for:
Parking ramps
Basement entry slopes
Loading bays
Warehouse ramps
Car showroom entries
Industrial movement areas
EV charging parking ramps
- Anti-Skid Pattern Options Groove Type
Best for:
Car ramps
Basement parking
Best for:
Trucks
Forklifts
Factories
Recommended Slope Design
Ramp Type : Ideal Gradient
Car Parking Ramp : 1:8 to 1:10
Truck Ramp : 1:12
Basement Entry : 1:10
Wheelchair Ramp : 1:12 minimum
| Parameter |
Specification |
| Material | High-density vitrified / concrete composite / rubber-polymer |
| Surface Finish | Anti-skid textured |
| Load Capacity | 20–80 Tons depending on base structure |
| Thickness | 15 mm to 40 mm |
| Tile Size |
300×300 mm, 400×400 mm, 600×600 mm |
| Water Absorption | <0.5% |
| Breaking Strength | >3500 N |
| Slip Resistance | R11 to R13 |
| Edge Type | Machine-cut / interlocking |
| Installation Type | Cement mortar or epoxy adhesive |
| Temperature Resistance | Suitable for outdoor heat & rain |
| Chemical Resistance | Oil, grease, mild acid resistant |
| Color Options | Grey, charcoal, black, terracotta |
| Finish | Matte / grooved / chequered |
Best Material Choices
1. Heavy Duty Vitrified Ramp Tile
Pros:
Premium finish
Long life
Heat resistant
Good aesthetics
Best for:
Commercial buildings
Luxury projects
2. Rubber Ramp Tiles
Pros:
Shock absorption
Extreme grip
Noise reduction
Best for:
EV parking
Indoor ramps
3. Concrete Chequered Tiles
Pros:
Cheapest
Extremely strong
Easy replacement
Best for:
Industrial use
Truck movement
Ideal Specification Sheet Heavy Duty Anti-Skid Ramp Tile
- Size: 300×300 mm
- Thickness: 20 mm
- Finish: Deep Groove Anti-Skid
- Material: Full Body Vitrified
- Slip Resistance: R12
- Water Absorption: <0.5%
- Breaking Strength: >4000 N
- Application: Basement Parking Ramp
- Color: Charcoal Grey
- Installation: Polymer Modified Adhesive with Epoxy Grout
- Load Capacity: Suitable for LMV/HMV movement
Heavy Duty Ramp Tiles Can Be Used In
Parking Ramp Tile
Recommended Construction Layer
Layer : Recommendation
Base Concrete : RCC M25
Thickness : 100–150 mm
Reinforcement : 8 mm TMT Mesh
Adhesive : C2TE/S1 Polymer Modified
Grout : Industrial Epoxy
Expansion Joint : Every 3–4 meters
Ideal Tender Specification Format
Parking Ramp Flooring Tile
Heavy duty anti-skid vitrified parking ramp tiles
Size: 300×300 mm
Thickness: 20 mm
Finish: Deep Grooved Matte
Slip Resistance: R12 minimum
Water Absorption: <0.5%
Breaking Strength: >4000 N
Shade: Charcoal Grey
Installation over prepared RCC surface using polymer modified adhesive
Joint filling with epoxy grout
Suitable for continuous LMV/HMV traffic
Recommended Premium Specification
For long-term durability in Indian conditions:
20 mm full body vitrified
Double deep groove pattern
R13 grip
Epoxy-based installation
Dark matte finish
Glossy ramp tiles should honestly be classified as performance art. One drizzle and the entire parking becomes an Olympic skating qualifier.
| Parameter |
Specification |
| Application Area | Basement parking ramps / podium parking |
| Tile Type | Heavy Duty Anti-Skid Ramp Tile |
| Material | Full Body Vitrified |
| Surface Finish | Deep Grooved / Textured Anti-Skid |
| Tile Size |
300×300 mm |
| Thickness | 18–20 mm |
| Color | Dark Grey / Charcoal Grey |
| Slip Resistance | R12 / R13 |
| Water Absorption | Less than 0.5% |
| Breaking Strength | >4000 N |
| Abrasion Resistance | High Traffic Grade |
| Water Absorption | Less than 0.5% |
| Breaking Strength | >4000 N |
| Abrasion Resistance | High Traffic Grade |
| Chemical Resistance | Resistant to oil & grease |
| Load Bearing Capacity | Suitable for LMV & HMV |
| Edge Finish | Machine Cut |
| Installation Method | Polymer Modified Adhesive |
| Joint Filling | Epoxy Grout |
| Recommended Base | RCC M25 Concrete |
| Recommended Slope | 1:8 to 1:10 |
| Usage | Parking ramps, driveways, industrial entries |
Parking Ramp Tile Can Be Used In
Industrial Ramp Tiles
Industrial Ramp Tile
Industrial Ramp Tiles Specification
Because apparently vehicles now need better footwear than most humans. Still, a proper ramp tile spec actually matters. One wrong choice and the basement ramp turns into an Olympic ice-skating qualifier during monsoon season. Heavy Duty Anti-Skid Industrial Ramp Tile General Specification
- Product Type: Heavy Duty Industrial Ramp Tile
- Application Area: Basement Parking Ramp / Industrial Vehicle Ramp
- Tile Size: 300 × 300 mm
- Thickness: 20 mm
- Material: Full Body Vitrified Tile
- Finish: Deep Groove / Ribbed Anti-Skid Finish
- Edge Type: Machine Cut Rectified Edge
| Technical Specifications |
|
| Parameter |
Specification |
| Slip Resistance | R12 / R13 |
| Water Absorption | < 0.5% |
| Breaking Strength | > 4000 N |
| Surface Hardness | Mohs 7+ |
| Abrasion Resistance | PEI Class IV / V |
| Chemical Resistance | Resistant to Oil, Grease & Mild Chemicals |
| Frost Resistance | Yes |
| Load Capacity | Suitable for LMV / HMV Movement |
| Thermal Resistance | High Temperature Stable |
| Surface Texture | Heavy Anti-Skid Grooved |
Recommended Colors
Charcoal Grey
Graphite Black
Cement Grey
Terracotta Red
Industrial Brown
Dark shades are preferred because tire marks happen. Humanity invented vehicles but somehow still acts shocked when rubber touches floors.
Installation Specification
Base Preparation
RCC ramp surface must be cured and levelled properly.
Minimum slope should follow drainage design.
Adhesive
Use Polymer Modified Heavy Duty Tile Adhesive (C2 Grade)
Joint Filling
Use Epoxy Grout
Joint Width: 3–5 mm
Recommended Bedding
High-strength mortar bed or adhesive fixing depending on ramp gradient.
Performance Requirements
Suitable for continuous vehicle movement
Resistant to tire friction and braking stress
Excellent wet grip during rain conditions
Crack-resistant under heavy load conditions
Suitable for commercial and industrial parking structures
Optional Premium Specification
For luxury commercial projects or high-traffic industrial ramps:
Thickness: 25 mm
Slip Resistance: R13
Reinforced Full Body Technical Vitrified Composition
Nano Protective Surface Layer
Acid & Oil Resistant Coating
Industrial Ramp Tiles Can Be Used In
Anti-Skid Ramp Tile
Anti-Skid Ramp Tile
Anti-Skid Ramp Tile Can Be Used In
Interlocking Ramp Tile
Interlocking Ramp Tile
Interlocking Ramp Tile Can Be Used In
